IMPRINT® Synthetic Surfacing

 

Imprint Specifications (.pdf) | Imprint Data Sheet (.pdf) | Imprint Colors (.pdf)
Imprint Patterns (.pdf) | Imprint Project Listing (.pdf)

Imprint is an increasingly used alternative to block paving throughout the world since its introduction in 1994. Engineers, architects, and specifiers are frequently turning to Imprint as a way of countering the liability issues of block paving, yet still gaining a visually excellent finished scheme. It is a hot applied resin-based compound which while hot is IMPRINTED with a mold representing the pattern chosen by the customer. You can also choose from a wide range of colors allowing greater creativity when specifying.

Unlike stamped asphalts and concrete, Imprint is laid on or into the existing surface at a thickness of 5/8”- 3/4” thick and is colored throughout its depth so the color does not wear off.

Its impressive durability lends itself to be used in the most heavily trafficked areas, often where other systems have failed. Its high aesthetic qualities have resulted in Imprint being used on some of the most aesthetically demanding and prestigious sites where in the past only natural materials would have sufficed.

Following successful installations in the USA, Imprint is now available to be used on schemes where in the past block paving or stamped asphalt/concrete would have been considered. If you want the look of block paving but want it to last many years without any maintenance, Imprint is the only solution.